After a long time of use, the welded wire mesh machine cannot avoid the occurrence of such or such minor failures. For this reason, we should do a good job of inspection before the operation to minimize the occurrence of failures. The reasons for the weakened welded wire mesh machine are: Which ones? Today, let’s follow the editor of Automatic brick force mesh welding machine to have a brief look!
1. If there are abnormal phenomena during the operation of the welded wire mesh machine, it should be shut down for maintenance in time. It is strictly forbidden to operate and operate under the condition of failure, because there are not only hidden dangers but also wear and tear on the welded wire mesh machine, and the welded wire mesh machine has welding. In the event of failure, we should check whether the welding sensor is damaged in time. If the welding sensor is damaged, the welding will be weak.

2. If the welding sensor contributes to the normal working range, we should check whether the position of the welding sensor is standard. Incorrect position of the welding sensor will cause welding failure.
3. During the operation of the welded wire mesh machine, the damage to the button switch that controls the welding will cause welding failures. Therefore, we should regularly maintain the welded wire mesh machine to reduce the hidden dangers of the normal operation of the welded wire mesh machine.
The above is the editor of Automatic brick force mesh welding machine: a brief introduction about the reasons that cause the welding machine to be weak.