Automatic construction mesh welding machine in china, including several groups of rebar frames for placing raw steel bars, horizontal bars extending from the rebar frames enter the wire feeder horizontally, a buffer frame is arranged behind the wire feeder, and a horizontally arranged rectangular parallelepiped in the middle of the buffer frame The frame, the transverse steel bars enter a straightening mechanism along the back of the frame, and the rear of the straightening mechanism is connected with two wire feeders and then connected with a screw straightener. The screw straightener includes a number of rotating cylindrical straightening shafts, and the steel bars pass through The hole in the middle of the straightening shaft is set, and the internal spacing of the straightening shaft is provided with a correction unit with a through hole in the middle; the rear of the screw straightener is connected to the welding gun.

A straightening mechanism realizes further straightening through rolling, and then the spiral straightener that rotates laterally along the steel bars eliminates lateral stress during rotation, so that the finished product after welding is not easily deformed, and the combined welding device can easily adjust the upper and lower grids. Welded rectangular mesh cage for easy maintenance and use.
The above is a brief introduction to some knowledge about Automatic construction mesh welding machine in china.