Do you understand the welding function of welding machine? Let’s take a look at it with the editor of Automatic wire mesh welding machine in roll mesh!
One, understand the welding method
There are two commonly used welding methods. One is pulse laser welding, which is mainly used for single-point fixed connection and welding of thin parts. When welding, a circular welding spot is formed; the other is continuous laser welding, which is mainly used for welding. In the welding and cutting of thick parts, a continuous weld is formed during the welding process. Generally speaking, the selection of welding materials, the selection of laser welding machines, and the selection of processing tables are the primary factors that affect the effect of laser welding.

2. Judgment of the ablation phenomenon in the welding process
Regarding whether the melting phenomenon can be produced and the degree of strength during the welding process, it depends primarily on the time, power density and peak power of the laser acting on the surface of the data. By manipulating the above parameters, the laser can be used for various welding processes.
3. Monitoring of tensile strength
It can monitor the tensile strength and judge the problem of the laser welding machine based on the result of the inspection. If there are problems such as poor welding or false welding at the time of processing, this time does not necessarily have to be the problem of the welding machine, maybe the data is not suitable, replace the data or change the waveform setting of the laser welding machine to weld again , And then carry out the effect evaluation.
The above is an introduction from the editor of Automatic wire mesh welding machine in roll mesh: a brief introduction to the relevant knowledge about the role of welding.