Anping Dixun wire mesh products co.,ltd

language
中国
韩国
韩国
韩国
韩国
韩国
Provide professional filter solutions
Provide professional filter solutions

Provide professional filter solutions

Haotian provide products with wide coverage in air filter, cabin filter, fuel filter, heavy duty and so on
02
02

02

Position:
Home
>
>
>
Correct use method of welded wire mesh machine

Correct use method of welded wire mesh machine

  • Classification:Company news
  • Author:
  • Source:
  • Published:2020-10-23
  • 访问量:0

[Description]Welded wire mesh machine is made of high-quality low-carbon steel wire row welding, and then cold plating (electroplating), hot plating, PVC coating and other surface passivation, plasticizing treatment, smooth mesh surface, uniform mesh, firm solder joints, and local Machining performance is good, stable, anti-corrosion and good corrosion resistance.So how to use it correctly?

Correct use method of welded wire mesh machine

[Description]Welded wire mesh machine is made of high-quality low-carbon steel wire row welding, and then cold plating (electroplating), hot plating, PVC coating and other surface passivation, plasticizing treatment, smooth mesh surface, uniform mesh, firm solder joints, and local Machining performance is good, stable, anti-corrosion and good corrosion resistance.So how to use it correctly?

  • Classification:Company news
  • Author:
  • Source:
  • Published:2020-10-23
  • 访问量:0
详情

Do you want to know how to use the welded wire mesh machine? Let me tell you step by step!

1. Turn on the power switch of the welded wire mesh machine to supply power to the welded wire mesh machine.

2. Whether the pull-net platform is the starting position, if it is the third step, if not, press the "forward" or "backward" key to adjust it to the correct position.

3. Turn the "Welding Net Control Switch" and "Pulling Net Control Switch" boards to the off position.

4. Put in the diameter wire.

5. Press the "ON" button to start the spindle motor.

6. Rotate the "speed control" button to turn the machine.

7. Turn the welded wire mesh machine to lower the first weft wire, first turn on the "Welding Net Control" switch, and then turn on the "Drawing Net Control" switch, the machine will automatically weld.

Note: The weft must be transferred to the weft placement device in time!

8. After the welding is completed, the machine will automatically stop.

9. Take off the mesh and insert the diameter wire for the next welded mesh.

10. Repeat steps 6-10. Work normally.

Note: Before the welded wire mesh machine is powered off, the pulling platform must return to the original pulling position.

 

    The above are the steps to use, the following are other equally important considerations for you:

1. The welded wire mesh machine can be welded after the water is passed through. The movable parts of the welding machine should be kept lubricated frequently, and the welding parts should be cleaned and welded to avoid damage to the electrode or affect the service life of the welding electrode.

2. When the mesh welding machine is working at a temperature below zero degrees Celsius, compressed air should be used to blow off the remaining cooling water in the cooling pipeline after the welding is completed, so as to prevent the water pipe and the welding transformer from freezing and breaking.

3. The welded wire mesh machine should be inspected and maintained after the power is off. The operator should wear canvas gloves and work around the body to avoid burns.

4. The welded wire mesh machine should not be damp to prevent leakage. Before using the welding machine that has not been used for a long time, check whether the insulation resistance is qualified or not. Use a 500V megger to test the insulation resistance between the welding machine's power supply line and the shell and not less than 2.5 megohms before it can be used.

5. There should be no corrosive gases, chemical deposits, corrosive, explosive, and flammable media that seriously affect the insulation performance of the welded wire mesh machine.

6. When working, the welded wire mesh machine should work strictly in accordance with the rated load duration, and overloading is not allowed.

7. The water diversion filter of the air source treatment device always drains water, and the water level cannot exceed the warning line, otherwise the compressed air containing water will enter the oil mist device and solenoid valve cylinder, causing the solenoid valve cylinder to wear faster, or even fail to work properly jobs.

 

Anping Dixun wire mesh products co.,ltd, located in the well-known hometown of wire mesh Anping County, Hebei Province, established in the year 1988 , with 27 years experience in wire mesh machine field. Dixun mainly products are wire mesh welding machinery, reinforce mesh.

 

we are constantly striving to meet the market and cater for the need of the customers to shape a famous national brand. We are willing to bring out our beautiful future with you!

关键词:

扫二维码用手机看

CONTACT US

ADD: Taicheng industry Zone, Anping County, Hengshui City, Hebei Province,China 

TEL: 0086-13780280569

EMAIL: dxexport@yeah.net

 Anping Dixun wire mesh products co.,ltd

- Follow us -

Username used for comment:
Customer message
Description:

Copyright © 2020  Anping Dixun wire mesh products co.,ltd

冀ICP备15019390号-1      Power by: 300.cn