Do you know how to use Welded Wire Mesh Machine? Let’s take a look at it with the editor below!
1. The Welded Wire Mesh Machine can be welded only after the water is passed through. The movable parts of the welding machine should be kept lubricated frequently, and the welding parts should be cleaned up before welding, so as not to damage the electrode or affect the service life of the welding electrode.
2. When it is working at a temperature below zero degrees Celsius, compressed air should be used to blow off the remaining cooling water in the cooling pipeline after the welding is completed, so as to prevent the water pipe and the welding transformer from freezing and breaking.
3. The Welded Wire Mesh Machine should be inspected and maintained after the power is off. The operator should wear canvas gloves and work around the body to avoid burns.
4. Don't get damp to prevent leakage of electricity. Before using the welding machine that has not been used for a long time, check whether the insulation resistance is qualified or not. Use a 500V megger to test the insulation resistance between the welding machine's power supply and the shell and the insulation resistance is not less than 2.5 megohms before being energized.
5. There should be no corrosive gases, chemical deposits, corrosive, explosive, and flammable media that seriously affect the insulation performance of the welder.
6. Welded Wire Mesh Machine should work strictly in accordance with the rated load duration when working, and overload usage is not allowed.
7. The water diversion filter of the air source treatment device needs to be drained frequently, and the water level cannot exceed the warning line, otherwise the compressed air containing water will enter the lubricator and solenoid valve cylinder, causing the solenoid valve cylinder to wear faster and even fail to work normally.
In summary, the editor tells: About the introduction of the use of Welded Wire Mesh Machine, I hope you can learn more through the introduction of the above editor.