Do you really understand the Welded Wire Mesh Machine? Let's follow the editor of Electrowelded mesh machine by feeding straightened rods for a simple understanding!
1. When welding and cutting, especially gas cutting, due to the radiation of shrinking air or oxygen flow, sparks, molten beads and iron slag splash around (larger molten beads and iron slag can splash to 5m away from the operating point Local), when there are flammable and explosive materials or gases in the operating conditions, fire and explosion disturbances can occur.
2. During high-altitude welding and cutting, the inflammable and explosive materials around the sparks were not cleaned up. The staff littered the welding rod heads during the course of their duties. After the work, they did not carefully reflect on whether there could be fire.
3. In the work of gas welding and gas cutting, the acetylene generator is not placed according to the requirements, and the welding (cutting) torch, rubber pipeline and acetylene generator are not installed as required before the work.
4. The length of the workpiece, such as the butt welding of strip steel, profile, wire, steel bar, steel rail, boiler steel pipe, oil and gas transportation and other pipelines.
5. Butt welding of annular workpieces, such as car rims and bicycles, motorcycle rims, butt welding of various chain links, etc.
6. Assembling welding of components will be simple rolling, forging, stamping or machined parts butt welding into complex parts to reduce costs. For example, automobiles tend to be butt welded on axle housing and rear axle housing, butt welded on various connecting rods and tie rods, and on special parts.
To sum up, the editor of Electrowelded Mesh machine by feeding straightened rods tells: A brief introduction to the relevant knowledge of Welded Wire Mesh Machine, I hope you can learn more.