First of all, it is necessary to pay special attention to the fact that when the inspection of the internal or external connector terminals is carried out, the power switch must be turned off before it can be carried out.
1. Do a good job of testing on a regular basis. For example, whether there is abnormal vibration, whether the joints of the welding wire and the insulation wrapping are loose or peeled off; whether there is abnormal heating in the cables and various wiring parts.
2. The automatic fence mesh panel welding machine from China is easy to inhale dust from the surroundings and accumulate in the machine, so it should be cleaned regularly. In particular, the transformers, reactance coils, gaps between coils, and power semiconductors should be cleaned.
3. Regularly check whether the screws at the wiring part are loose, remove rust when rusted, and maintain good contact.

4. The long-term use of the automatic fence mesh panel welding machine from China will inevitably cause the shell to be deformed due to contact, rusted and damaged, and the internal parts will also be worn away. Therefore, during the annual maintenance and inspection, the replacement of defective parts and the shell should be implemented. Repair, reinforcement of insulation deterioration parts. It is best to replace all defective parts with new ones to ensure the performance of the automatic fence mesh panel welding machine from China.
The regular maintenance and inspection implemented above can reduce the occurrence of welding failures. Although it takes some time and effort, it can prolong the life of the automatic fence mesh panel welding machine from China, improve the efficiency of the operation, ensure the performance of the automatic fence mesh panel welding machine from China and improve the safety.