Maintenance of quality automatic reinforcing mesh welding machine
- Classification:Industry news
- Author:
- Source:
- Published:2022-10-08
- 访问量:0
[Description]In order to make the quality automatic reinforcing mesh welding machine work normally, the machine must be carefully maintained. For the maintenance system formulated in the manual, the user can make appropriate arrangements according to the situation, but do not omit maintenance items for no reason.
Maintenance of quality automatic reinforcing mesh welding machine
[Description]In order to make the quality automatic reinforcing mesh welding machine work normally, the machine must be carefully maintained. For the maintenance system formulated in the manual, the user can make appropriate arrangements according to the situation, but do not omit maintenance items for no reason.
- Classification:Industry news
- Author:
- Source:
- Published:2022-10-08
- 访问量:0
In order to make the quality automatic reinforcing mesh welding machine work normally, the machine must be carefully maintained. For the maintenance system formulated in the manual, the user can make appropriate arrangements according to the situation, but do not omit maintenance items for no reason.
Maintenance content of quality automatic reinforcing mesh welding machine:
1. The quality automatic reinforcing mesh welding machine must not get wet and must be stored in a dry place. When storing, cover it with oil cloth to prevent moisture from entering.
2. The intrusion of dirt, water droplets, metal or other debris must be avoided as much as possible during storage or operation.
3. When the quality automatic reinforcing mesh welding machine is working, do not cover the motor with other debris, so as not to hinder the heat dissipation and cause the motor to overheat and burn out.
4. Pay attention to the heating of the motor at any time, and pay attention not to overload the current and voltage.
5. Always check the collector ring for abnormal sparks. If there is abnormal noise when the motor is running, check it immediately.
6. The silicon rectifier element should be well ventilated, and the radiator and cover should not be covered with objects that prevent heat dissipation.
7. Always clean up the dirt on each part of the quality automatic reinforcing mesh welding machine, and check the fastening screws to prevent loosening.
8. Regularly check the control circuit for de-soldering, broken ends, loose screws, etc.
扫二维码用手机看
CONTACT US
ADD: Taicheng industry Zone, Anping County, Hengshui City, Hebei Province,China
TEL: 0086-13780280569
EMAIL: dxexport@yeah.net
- Follow us -
Copyright © 2020 Anping Dixun wire mesh products co.,ltd