Anping Dixun wire mesh products co.,ltd

language
中国
韩国
韩国
韩国
韩国
韩国
Provide professional filter solutions
Provide professional filter solutions

Provide professional filter solutions

Haotian provide products with wide coverage in air filter, cabin filter, fuel filter, heavy duty and so on
02
02

02

Position:
Home
>
>
>
Operating procedures for customized wire straightening and cutting machine

Operating procedures for customized wire straightening and cutting machine

  • Classification:Industry news
  • Author:
  • Source:
  • Published:2023-02-10
  • 访问量:0

[Description]1. The customized wire straightening and cutting machine must be in charge of a special person with a certificate.
2. The operator is not allowed to leave the customized wire straightening and cutting machine too far during the operation, and the machine must be stopped during loading, wire threading, and head cutting.

Operating procedures for customized wire straightening and cutting machine

[Description]1. The customized wire straightening and cutting machine must be in charge of a special person with a certificate.
2. The operator is not allowed to leave the customized wire straightening and cutting machine too far during the operation, and the machine must be stopped during loading, wire threading, and head cutting.

  • Classification:Industry news
  • Author:
  • Source:
  • Published:2023-02-10
  • 访问量:0
详情

Operating procedures for customized wire straightening and cutting machine:
1. The customized wire straightening and cutting machine must be in charge of a special person with a certificate.
2. The operator is not allowed to leave the customized wire straightening and cutting machine too far during the operation, and the machine must be stopped during loading, wire threading, and head cutting.
3. In the process of straightening the steel bar, when the steel bar jumps out of the pallet guide groove, does not reach the fixed-length mechanism, or the messy wire or the steel bar falls off, the limit switch should be pressed in time to stop cutting the steel bar, and it can be used only after the adjustment is completed. .
4. When adjusting each set of steel bars to the end or straightening short steel bars, you should hold the casing to escort the steel bars to the guide and straightening barrel, so as to avoid injury accidents when they swing freely.
5. Before the straightening mold is fixed and the protective cover is not covered, it is not allowed to penetrate the steel bar, so as to prevent the straightening mold from flying out and hurting people after starting the customized wire straightening and cutting machine.
6. During the operation of the customized wire straightening and cutting machine, it is not allowed to adjust the roller, it is strictly forbidden to operate with gloves, and it is strictly forbidden to carry out maintenance work during the operation of the machine.
7. The steel bars that have been straightened and cut should be divided into small bundles according to the specifications and the number of roots and stacked neatly, and random piles are not allowed to prevent quality accidents caused by different components and properties of steel bars. After the customized wire straightening and cutting machine is finished, the power supply must be cut off.
8. Strictly implement the "cross operation policy" to ensure that the customized wire straightening and cutting machine is in good working condition.

关键词:

扫二维码用手机看

CONTACT US

ADD: Taicheng industry Zone, Anping County, Hengshui City, Hebei Province,China 

TEL: 0086-13780280569

EMAIL: dxexport@yeah.net

 Anping Dixun wire mesh products co.,ltd

- Follow us -

Username used for comment:
Customer message
Description:

Copyright © 2020  Anping Dixun wire mesh products co.,ltd

冀ICP备15019390号-1      Power by: 300.cn