Precautions for operation of customized fully automatic chain link fence machine
1. The operator of the customized fully automatic chain link fence machine shall not touch the transmission gears, transmission sheaves, sprockets, belts, chains, straightening machines, induction bodies, proximity switches, electric cabinets, and transformers with any part of the body or any object. Conductor parts carrying dangerous voltage.
2. The operator of the customized fully automatic chain link fence machine shall not put his hands or objects close to the upper electrode that is being pressurized or put it between the upper and lower electrodes.
3. Operators are not allowed to plug in or touch off the power adjustment handle on the power transformer, and are not allowed to lift the protective plate.
4. The operator of the customized fully automatic chain link fence machine shall not remove or break the zero connection (grounding) safety protection line on the main machine and the electric control cabinet, and regularly check whether the zero connection (grounding) safety protection line is in good condition.

6. Operators are not allowed to adjust the devices in the electric control cabinet at will, and are not allowed to put tools, iron wires and other sundries into the electric control cabinet or put them on the top of the cabinet or on the rack.
7. Timely add lubricating oil to bearings, sliders, slideways, sliding sleeves, sprockets, chains, gears, racks and other rolling friction parts, and do not run without oil. The filling of lubricating oil should be carried out after the customized fully automatic chain link fence machine stops.
8. Pay attention to watching, listening, and smelling at all times, and discover signs of accidents and hidden dangers of equipment in advance. When abnormal phenomena are found in the customized fully automatic chain link fence machine, stop the power supply immediately for inspection and processing.
9. When the operator leaves the customized fully automatic chain link fence machine for some reason, he must stop the power supply and turn the speed controller knob to the minimum. When leaving for a long time, turn off the speed control power switch and the main power switch, and lock the electric control cabinet to avoid misoperation by others.