The operating rules of automatic reinforcing mesh welding machine:
1. Before use, check that the plug of the control board must be firmly inserted into the socket;
2. The shell of the welding machine must be grounded reliably, and the welding machine must not be affected by moisture;
3. Adjust the secondary voltage according to the thickness of the weldment, and the indicator light should be on after turning on the power switch;
4. Step on the foot pedal, the contactor is pulled in, and the welding time is controlled, and the welding process can be completed, and spot welding and multi-point co-welding can be completed;
5. It is strictly forbidden to touch the contacts with hands to prevent electric shock and burns;
6. After the operation of the automatic reinforcing mesh welding machine is completed, the photoelectric head should be repaired in time;
7. After the operation of the automatic reinforcing mesh welding machine is completed, the head, spring, lever group and pedals should be checked for damage and looseness, and should be restored and repaired in time;
8. After each job is finished, check the electrical control components to see if they are effective. If they are damaged, they should be replaced and repaired in time;
9. The damaged mechanical transmission parts are repaired on the same day. The electronic control part will contact the manufacturer for repair as soon as possible.
10. When the automatic reinforcing mesh welding machine is powered on, it is not allowed to open the control box casing, and it is not allowed to touch all parts of the box with hands to avoid electric shock.
11. When checking the internal wiring of the automatic reinforcing mesh welding machine and the wiring of the control board, be sure to cut off the power supply. 
12. It is not allowed to touch the components on the control board with your hands, otherwise the components may be damaged by static electricity. 
13. The potentiometers on the control board of the automatic reinforcing mesh welding machine have been adjusted, please do not move. 
14. The control box must be connected to cooling water before it can be used, and it is necessary to ensure that the cooling water has sufficient flow and pressure. To regularly check the operation of the water cooling system, the flow of water needs to be kept unobstructed and leak-free. 
15. Regular power outages to check the wiring in the box.