Welding machine is made of high-quality low-carbon steel wire row welding, and then cold plating (electroplating), hot plating, PVC coating and other surface passivation, plasticizing treatment, smooth mesh surface, uniform mesh, firm solder joints, Local machining performance is good, stable, anti-corrosion, and good corrosion resistance. So do you know what causes the welder to be weak? Follow the editor of Welded mesh welding machine to have a simple understanding!
1. If there are abnormal phenomena during the use of the welded wire mesh machine, it should be shut down for maintenance in time. It is strictly forbidden to continue to operate under the condition of failure, because not only there are hidden dangers in protection but also some wear and tear on the welded wire mesh machine. In case of welding failure, we should check whether the welding sensor is damaged in time. If the welding sensor is damaged, the welding will be weak.
2. If the welding sensor contributes to the normal working range, we should check whether the position of the welding sensor is standard. Incorrect position of the welding sensor will cause welding failure.
3. During the use of the welded wire mesh machine, damage to the button switch that controls the welding will cause welding failures, so the welded wire mesh machine should be maintained regularly.
To sum up, the editor of Welded mesh welding machine tells us: You can learn more about the relevant knowledge about the welding of mesh welding machine.