Do you know the characteristics of reinforcing mesh welding machine? Let's take a look at it briefly!
1. The weft thread is straightened and cut according to the specified size in advance, and it can be directly put into the storage tank. Each time the distribution mechanism moves, a weft thread will be separated and arranged in the discharge groove, and the thread will be automatically dropped. During welding, the blanking mechanism moves once every time as required by the procedure to drop a weft thread onto the welding level.
2. The diameter wire is pre-adjusted and cut according to the specified size, and placed in a fixed position manually (there is a wooden strip mold).
3. The diameter wire is placed manually, the weft wire is placed in the storage tank, and a mesh can be automatically welded by inputting the size on the CNC computer.
4. Holes of different sizes between weft and weft can also appear on the same web.
5. The hole pitch of the diameter wire is adjustable, and the hole pitch of the weft wire can be input to the computer to achieve the hole pitch you get.
6. Both the warp and weft are straightened and cut by the straightening machine in advance.
7. The reinforcing mesh welding machine has the characteristics of one-time compaction and separate control welding.
8. The gear adjustment can be divided into nine levels, which expands the range of welding wire diameter.
9. The welding power of the reinforcing mesh welding machine is electric, using a servo stepping motor hopper, a brake motor driving the trolley let-off, and a stepping motor driving the trolley to pull the net.
In summary, it is a brief introduction to the relevant knowledge about the characteristics of the reinforcing mesh welding machine.