What are the reasons for the weak welder of the Welded Wire Mesh Machine?
- Classification:Welded Wire Mesh Machine
- Author:
- Source:
- Published:2021-05-07
- 访问量:0
[Description]Welded Wire Mesh Machine is made of high-quality low-carbon steel wire welding, and then cold plating, electroplating, hot plating, PVC coating and other surface passivation, plasticizing treatment, smooth mesh surface, uniform mesh, firm solder joints, Local machining performance is good, stable, anti-corrosion, and good corrosion resistance.
What are the reasons for the weak welder of the Welded Wire Mesh Machine?
[Description]Welded Wire Mesh Machine is made of high-quality low-carbon steel wire welding, and then cold plating, electroplating, hot plating, PVC coating and other surface passivation, plasticizing treatment, smooth mesh surface, uniform mesh, firm solder joints, Local machining performance is good, stable, anti-corrosion, and good corrosion resistance.
- Classification:Welded Wire Mesh Machine
- Author:
- Source:
- Published:2021-05-07
- 访问量:0
Welded Wire Mesh Machine is made of high-quality low-carbon steel wire welding, and then cold plating, electroplating, hot plating, PVC coating and other surface passivation, plasticizing treatment, smooth mesh surface, uniform mesh, firm solder joints, Local machining performance is good, stable, anti-corrosion, and good corrosion resistance. However, the Welded Wire Mesh Machine cannot avoid the occurrence of such or other minor failures after a long time of use. For this reason, we should do a good job of inspection before operation to minimize the occurrence of failures, which will cause the welding machine to be unstable. What are the reasons? Let’s take a look at it with the editor below!
1. During operation, if there is any abnormal phenomenon, it should be shut down in time for maintenance. It is strictly forbidden to operate under the condition of failure, because there are not only potential safety hazards but also certain wear and tear on the Welded Wire Mesh Machine. Welded Wire Mesh Machine will be worn when there is a welding failure. Check whether the welding sensor is damaged in time. If the welding sensor is damaged, the welding will be weak.
2. If the welding sensor contributes to the normal working range, we should check whether the position of the welding sensor is standard. Incorrect position of the welding sensor will cause welding failure.
3. Damage to the button switch that controls welding during operation will lead to welding failures. Therefore, we should regularly maintain the Welded Wire Mesh Machine to reduce potential safety hazards and allow it to operate normally.
In summary, the editor introduces the reasons for the weak welding machine in Welded Wire Mesh Machine. I hope you can learn more through the introduction of the above editor.
扫二维码用手机看
CONTACT US
ADD: Taicheng industry Zone, Anping County, Hengshui City, Hebei Province,China
TEL: 0086-13780280569
EMAIL: dxexport@yeah.net
- Follow us -
Copyright © 2020 Anping Dixun wire mesh products co.,ltd