Do you really know how to use Welded Wire Mesh Machine? Let’s take a look at it with the editor below!
1. It can be welded after passing water. The movable parts of the welding machine should be kept lubricated frequently, and the welding parts should be cleaned and welded, so as not to damage the electricity or affect the service life of the welding electricity.
2. When working at a temperature below zero degrees Celsius, compressed air should be used to blow off the remaining cooling water in the cooling pipeline after welding, so as to prevent the water pipe and the welding transformer from freezing and breaking.
3. The Welded Wire Mesh Machine should be inspected and maintained after the power is off. The operator should wear canvas gloves and work around the body to avoid burns.
4. Don't get damp to prevent leakage of electricity. Before using the welding machine that has not been used for a long time, check whether the insulation resistance is qualified or not. Use a 500V megger to test the insulation resistance between the welding machine's power supply and the shell and the insulation resistance is not less than 2.5 megohms before being energized.
5. There should be no corrosive gases, chemical deposits and corrosive, explosive, and flammable media that seriously affect the insulation performance of the welder in the use site of the Welded Wire Mesh Machine.
6. Work in strict accordance with the rated load continuity rate when working, and overload usage is not allowed.
7. The water diversion filter of the air source treatment device often drains, and the water level cannot exceed the warning line, otherwise the compressed air containing water will enter the oil mist device and the solenoid valve cylinder, causing the solenoid valve cylinder to wear faster and even fail to work normally.
To sum up, this is the introduction of the editor: About the introduction to the use of Welded Wire Mesh Machine, you can learn more from the introduction of the editor above.