Anping Dixun wire mesh products co.,ltd

language
中国
韩国
韩国
韩国
韩国
韩国
Provide professional filter solutions
Provide professional filter solutions

Provide professional filter solutions

Haotian provide products with wide coverage in air filter, cabin filter, fuel filter, heavy duty and so on
02
02

02

Position:
Home
>
>
>
Wire straightening cutting machine in china introduces the use of cutting machine knowledge

Wire straightening cutting machine in china introduces the use of cutting machine knowledge

  • Classification:Industry news
  • Author:
  • Source:
  • Published:2021-10-14
  • 访问量:0

[Description]After the cutting machine is installed, turn on the power to check whether the rotation of each part of the machine is flexible and whether the fasteners are loose.

Wire straightening cutting machine in china introduces the use of cutting machine knowledge

[Description]After the cutting machine is installed, turn on the power to check whether the rotation of each part of the machine is flexible and whether the fasteners are loose.

  • Classification:Industry news
  • Author:
  • Source:
  • Published:2021-10-14
  • 访问量:0
详情

How much do you know about the instructions for use of the cutting machine? Follow the Wire straightening cutting machine in china editor to have a simple understanding!
1. After the cutting machine is installed, turn on the power to check whether the rotation of each part of the machine is flexible and whether the fasteners are loose.
2. Turn on the power, press the button of the host, and check whether the direction of the blade is consistent with the direction of the arrow. If it is reversed, adjust immediately. After the inspection is completed, the rock sample can be clamped for cutting. When the rock sample is clamped, a reliable clamping point should be selected to prevent virtual clamping and false clamping. In order to avoid damage to the tool and rock sample due to rock movement during the cutting process.
3. When clamping irregular rocks, the top pressure method can be used for clamping. Clamping steps: first place the rock sample 8 on the workbench, and then insert the top pressure mobile jig 10 along the T-slot 3, select the distance between the jig and the rock sample, lock the fixture base screw, and move the top rod up and down Bolt 13 to select a reliable clamping point, and then lock the ejector rod moving nut 11, and then rotate the ejector rod until the ejector rod closes the rock sample, and tighten the ejector rod nut 12 at the same time to prevent the ejector rod from cutting. Loose.
4. When working, start the main motor first, and then press the work feed button. When starting to cut, because the rocks are often irregular in shape, the feed speed should be slow at this time, and the blade can be faster after all the blades enter the rock sample. .
The above is the introduction of Wire straightening cutting machine in china editor: a brief introduction to the relevant knowledge about the use of the cutting machine.

关键词:

扫二维码用手机看

CONTACT US

ADD: Taicheng industry Zone, Anping County, Hengshui City, Hebei Province,China 

TEL: 0086-13780280569

EMAIL: dxexport@yeah.net

 Anping Dixun wire mesh products co.,ltd

- Follow us -

Username used for comment:
Customer message
Description:

Copyright © 2020  Anping Dixun wire mesh products co.,ltd

冀ICP备15019390号-1      Power by: 300.cn