Do you know what the characteristics and parameters of Welded Wire Mesh Machine are? Let’s take a look at it with the editor below!
1. Features
1. The welding host adopts imported pneumatic components, which have long service life, high precision, and high pressure, which promotes firm welding points.
2. The welding transformer adopts a new type of welded mesh transformer, and the gear adjustment can be divided into eight levels, which expands the range of welding wire diameter. The professionally designed lower electrode block has low wear rate and can be used in many ways.
3. The netting system is controlled by computer programming, the spacing of the transverse ribs is adjusted steplessly, and the change of the hole spacing is set by the program. There can be a variety of different transverse ribs on the same mesh.
4. The control system adopts PLC programming controller, touch screen display, convenient operation interface and simple working mode.
5. The blanking system adopts patented technology, single root single drop, roll barrel blanking, without manual placement.
6. Welded mesh has a wide range of uses, and has been widely used in industrial and civil buildings, floor slabs, house covers, walls, bridges, concrete pavements, platforms, airports, cement pipes, concrete precast parts, retaining walls, mountain slopes, tunnels, Piers, dams, etc.
Two, parameters
1. The width of the larger welded mesh is 2500mm, and the diameter of the welded steel bar is 5mm-12mm.
2. The distance between diameter wires is ≥50mm, which can also be adjusted.
3. The spacing of the weft holes is 50-600mm.
4. The welding transformer is air-cooled and the power is greater than 1500KVA, which can realize one-time compression and partial welding.
In summary, it is an introduction to the characteristics and parameters of Welded Wire Mesh Machine. I hope you can learn more.