Do you know all about the cutting machine? Follow the editor of Wire straightening cutting machine supplier for a simple understanding!
1. During the processing, the cutting conditions should be inspected and supervised frequently, and the problems should be dealt with immediately.
2. Pay attention to observe and judge the processing stability when starting the cut, and adjust in time when defects are found.
3. Check whether the jet selection is reasonable, use high-pressure jets for rough machining and low-pressure jets for finishing.
4. Choose open processing or close processing according to the actual situation of the workpiece, and shorten the distance between the nozzle and the workpiece as much as possible on the premise of avoiding interference. During close processing, the distance between the nozzle and the workpiece is generally 0.05 to 0.1 mm.
5. Check whether the feeding speed of the electrode wire is appropriate.
6. Check whether the electrode wire tension is sufficient. When cutting the taper, the tension should be reduced to half of the usual.
7. It is necessary to confirm whether the program and compensation amount are correct before thread cutting.
In summary, the editor of Wire straightening cutting machine supplier tells: a brief introduction to the relevant knowledge of the cutting machine.